Hitachi GR2000 Series Manual do Utilizador descarregar pdf (Página 136)

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2

1-94 GR2K-GA-0014

Ver. 07-02

Range of value: <kbps> : 0 to 2400000 (0 to 2.4G) (10-decimals).

If 0 to 4 is specified in the case of RP-C and RP-D, the

operation is performed by taking the contract band as

4.1[kbit/s].

<Byte> : 0 to 131072 (10-decimals)

Specifies the maximum contract band restriction by kbit/s. Specifies burst size

in byte unit. If a value greater than the line speed is set, no action at breach is

taken.

When setting this parameter, it is not possible to set -upc, or -upc_burst.

Packets exceeding the maximum band when setting this parameter are all

discarded.

When this is used, the number of entries used per list may become two or four

entries.(Note 1)

Default: None. (No contract band surveillance is executed.)

Range of value: <kbps> : 0 to 2400000 (0 to 2.4G) (10-decimals).

If0to11isspecifiedinthecaseofRP-A,theoperationis

performed by taking the contract band as 12[kbit/s].

If 0 to 4 is specified in the case of RP-C and RP-D, the

operation is performed by taking the contract band as

4.1[kbit/s].

<Byte> : 0 to 131072 (10-decimals)

Specifies the minimum band assurance by kbit/s. Specifies burst size in byte

unit.

If a value greater than the line speed is set, no action at breach is taken.

When setting this parameter, it is not possible to set -upc, or -upc_burst.

When this parameter is used, the number of entries used per list may become

two or four entries. (Note 1)

Default: None. (No contract band surveillance is executed.)

Range of value: <kbps>: 0 to 2400000 (0 to 2.4G) (10-decimals).

If 0 to 4 is specified, the operation is performed by taking the

contract band as 4.1[kbit/s].

<Byte>: 0 to 131072 (10-decimals)

Specifies the connection branching index number (index specified in the DLCI

group information or the Vc-Group information). It selects and transmits DLCI/

VC specified in the group when relaying the packet that agrees with the flow

detecting conditions. For the list information setting the connection branching

index number, specify out (Outbound) as the flow control of the output side.

Default: None.

Range of value: 0 to 7.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 499 500

Sem comentários

Hitachi GR2000 Series Manual do Utilizador Página 136